Wiseworth Canada: H-Series Heat-of-Compression Dryers

Ingersoll-Rand

HC-Series Heat-of-Compression Dryers

Ingersoll-Rand's heat-of-compression dryers are dual tower, desiccant designs utilzing the waste heat developed by an air compressor, during the compression process for the regeneration of moisture saturated desiccant.

Immense energy savings are achieved using heat-of- compression to operate a dry compressed air system with instrument quality air available at all times.

Energy Savings
The H-Series, heat-of-compression dryer, is the most efficient regnerative dryer available. Using the heat of compression for regeneration, the H-Series dryer operates on minimum electricity consumption - less than that of a light bulb!
Exceptional Dewpoints
The H-Series design delivers Instrument Quality Air with dewpoints better than those produced by refrigerated dryers.
Low Pressure Drop
Pressure drop is a serious concern and a real cost. H-Series dryers are designed to minimize this cost. All valves are full flow design and a minimum number of elbows are used to keep pressure loss to a minimum.
System Flexibility
The H-Series design allows multiple compressors to be matched to one dryer enhancing system flexibility.
Complete Dryer Solution
The H-Series dryers are fully packaged, complete systems, including aftercooler, moisture separator, drain traps and an afterfilter. All components, including block and bypass valves, are mounted on the H-Series dryer skid resulting in a compact package and reduced installation costs.

Specifications

Model	CFM	Capacity m3/hr	Pipe Conn. (in.)	Dimensions L x W x H (in.)	Weight (lbs.)
H-13	1158	1862	3	113 x 67 x 86	4750
H-19	1667	2680	3	108 x 72 x 86	5050
H-30	2604	4187	4	120 x 72 x 89	6900
H-43	3750	6029	6	156 x 90 x 94	12400
H-58	5105	8208	6	164 x 95 x 97	12800
H-75	6667	10719	8	182x 113 x 98	17400
H-95	8438	13566	8	210 x 120 x 105	22300
H-118	10418	16749	8	216 x 121 x 106	23950
H-142	12606	20267	10	237 x 134 x 107	26100
H-170	15002	24119	10	243 x 142 x 116	33100